Typical Property Values

Physical Properties	ASTM Test Method	Units	Made with DELRIN® resin (typical)	Made With DELRIN® AF resin
Density	D792	lbs/cu in	0.0564	0.0538
Water absorption, 24 hours	D570	%	.25	0.20

Mechanical Properties	ASTM Test Method	Units	Made With DELRIN® resin (typical)	Made With DELRIN®AF resin
Specific Gravity	D792	g/cu cm.	1.56	1.49
Tensile Strength at break, 73° F	D638	psi	8,500	7,000
Tensile Modulus, 73°F	D638	psi	9 X 105	----
Elongation at break, 73° F	D638	%	12	20
Flexural Strength, 73° F	D790	psi	10,700	12,000
Flexural Modulus, 73°F	D790	psi	----	3 X 105
Izod Impact Strength, Notched, 73°F	D256	ft-lbs/in.	0.8	1.5
Rockwell Hardness	D785	----	R118	R118

Thermal Properties	ASTM Test Method	Units	Made With (DELRIN®resin typical)	Made With DELRIN® AF resin
Heat Deflection, 264 psi	D648	°F	316	215
Melting Point	----	°F	347	347
Coefficient of Linear Thermal Expansion	D696	in./in./-°F	4.5 X 10-5	5.2 X 10-5
Applicable Temp. Range for Thermal Expansion	----	°F	85 - 140	85 - 140
Max. Serving Temperature for Long Term	----	°F	185	185
Flammability	UL94	----	HB	HB

Tribological Properties	ASTM Test Method	Units	Made With DELRIN®(typical)	Made With DELRIN® AF Resin
Coefficient of Friction	----	Dynamic	0.0564	0.0538
Wear Factor	----	cu. in/hr. X (1/FV)	0.34	20 X 10-10
Limiting PV, 100 fpm	----	ft-lbs/min.	----	12,000

Material Availability: To See More Data Click Here

Rods:   Diameters 1/8" to 8 " 
Plates: 1/4" to 6" thickness 
            24" X 48", 48" X 120", 60" X 120" 
Profiles, tubes and special sizes are available on request