VF-4   TRAVELS  S.A.E. Metric Maximum X Axis  50 "  1270 mm   Maximum Y Axis  20 "  508 mm   Maximum Z Axis  25 "  635 mm   Spindle nose to table (min)  4 "  102 mm   Spindle nose to table (max)  29 "  737 mm   STANDARD TABLE  S.A.E. Metric Length  52 "  1321 mm   Width  18 "  457 mm   Max Weight on Table  3500 lb  1588 kg   T-slot Width  .625 "  15.875 mm   T-slot Center Distance  3.15 "  80 mm   Number of T slots  5   5   SPINDLE  S.A.E. Metric Taper Size  #40 Taper "  #40 Taper   Spindle Max Speed  7500 rpm  7500 rpm   Drive System  Direct Speed Belt Drive    Direct Speed Belt Drive   Max Torque Standard  75 ft-lb @ 1400 rpm 102 Nm @ 1400 rpm  with Optional Gearbox  250 ft-lb @ 450 rpm 339 Nm @ 450 rpm  Spindle Motor Max. Rating  20 hp  14.9 kw   Bearing Lubrication  Air/Oil injection   Air/Oil injection   Cooling  Liquid Cooled   Liquid Cooled   AXIS MOTORS  S.A.E. Metric Max Thrust Rating X  2550 lb  11343 N   Max Thrust Rating Y  2550 lb  11343 N   Max Thrust Rating Z  4200 lb  18683 N   FEEDRATES  S.A.E. Metric Rapids on X Axis  1000 in/min  25.4 m/min   Rapids on Y Axis  1000 in/min  25.4 m/min   Rapids on Z Axis  1000 in/min  25.4 m/min   Max Cutting  650 in/min  16.5 m/min   TOOL CHANGER  S.A.E. Metric Capacity Standard  20   20   Tool Type / Taper  CT or BT/40   CT or BT/40   Max Tool Diameter Std (full)  3.5 "  89 mm   Maximum Tool Weight  12 lb  5.4 kg   Changer Type Standard (Optional)  Carousel (SMTC)   Carousel (SMTC)   Tool-to-Tool (avg)  4.2 sec  4.2 sec   Chip-to-Chip (avg)  4.5 sec  4.5 sec   ACCURACY (SINGLE AXIS)  S.A.E. Metric Positioning (±)  .0002 "  0.0051 mm   Repeatability (±)  .0001 "  0.0025 mm   GENERAL  S.A.E. Metric Door Opening Width  48.5 "  1232 mm   Max Operating Height  117.5 "  2984 mm   Max Operating Width  138.86 "  3527 mm   Machine Weight  13300 lb  6033 kg   Max Operating Depth  110 "  2794 mm   Air Required  4 CFM @ 100 psi 113 lpm @ 6.9 bar  Power Required  14 kVA; 200-250 VAC @ 50A, 3-phase; 50-60 H