Lub-Re-Lese
Lub-Re-Lese
is a new type of cast nylon
produced by addition of a
special oil to the polymer
structure.
By
laboratory test it was proven
that this second-generation
oil-filled product dramatically
reduces friction in comparison
to cast nylon. This means that
Lub-Re-Lese is particularly well
suited for sliding parts under
high load and increased speed.
The
specific advantages of Lub-Re-Lese
over standard cast nylon 6 are
as follows:
- High
degree of self-lubrication.
- Low
static coefficient of
friction.
- Low
dynamic coefficient of
friction.
- Reduced
heat buildup.
- Reduced
wear and enormously
increased part life due to
less heat
buildup
in the area of friction.
- Reduced
moisture absorption (about
5% for Lub-Re-Lese vs. 6-7%
for cast nylon).
- Increased
dimensional stability.
Lub-Re-Lese
features a homogeneous
distribution of the lubricating
oil during polymerization.
Therefore, the improved sliding
properties remain, even after
machining and part wear.
Lubrelese
is the ideal material for
textile machinery components
where contamination by external
lubrication has to be avoided,
and for gears where external
lubrication is insufficient.
When
using additional lubricants with
Lub-Re-Lese, the external
lubrication influences the
coefficient of friction to a
very high degree. It can be
reduced to 0.05. Consequently,
the p.v. value may be increased.
The advantages of the integrated
lubrication of Lub-Re-Lese are
particularly noticeable when
there is a combination of static
and dynamic friction, especially
when external lubrication is
insufficient or impossible.
Lubrelese
is supplied in yellow color for
easy identification.
This
information is only to assist
and advise you on current
technical knowledge and is given
without obligation or liability.
All trade and patent rights
should be observed. All
rights reserved. |
