CALL TOLL FREE
888-752-0004

Delrin® Resin/Specs

Plastic Products offers an extensive line of plastic materials and has complete facilities for plastic molding, machining & fabrication. In short, we can be your complete source for nearly anything plastic and can further assist you with our manufacturing expertise. Please allow us the opportunity to quote your requests.


Technical Product Data Sheets

Made with / DELRIN® resin or Acetal copolymer,
DELRIN® AF resin or Acetal copolymer with PTFE lubricant

Typical Property Values

Physical Properties ASTM Test Method Units Made with DELRIN® resin (typical) Made With DELRIN® AF resin
Density D792 lbs/cu in 0.0564 0.0538
Water absorption, 24 hours D570 % .25 0.20
Mechanical Properties ASTM Test Method Units Made With DELRIN® resin (typical) Made With DELRIN® AF resin
Specific Gravity D792 g/cu cm. 1.56 1.49
Tensile Strength at break, 73°F D638 psi 8,500 7,000
Tensile Modulus, 73°F D638 psi 9 X 105 —-
Elongation at break, 73°F D638 % 12 20
Flexural Strength, 73°F D790 psi 10,700 12,000
Flexural Modulus, 73°F D790 psi —- 3 X 105
Izod Impact Strength, Notched, 73°F D256 ft-lbs/in. 0.8 1.5
Rockwell Hardness D785 —- R118 R118
Thermal Properties ASTM Test Method Units Made With (DELRIN® resin
typical)
Made With
DELRIN® AF resin
Heat Deflection, 264 psi D648 °F 316 215
Melting Point —- °F 347 347
Coefficient of Linear Thermal Expansion D696 in./in./-°F 4.5 X 10-5 5.2 X 10-5
Applicable Temp. Range for Thermal Expansion —- °F 85 – 140 85 – 140
Max. Serving Temperature for Long Term —- °F 185 185
Flammability UL94 —- HB HB
Tribological Properties ASTM Test Method Units  Made With
DELRIN®(typical)
Made With
DELRIN® AF Resin
Coefficient of Friction —- Dynamic 0.0564 0.0538
Wear Factor —- cu. in/hr. X (1/FV) 0.34 20 X 10-10
Limiting PV, 100 fpm —- ft-lbs/min. —- 12,000

Material Availability: To See More Data Click Here

Rods: Diameters 1/8″ to 8 ”
Plates: 1/4″ to 6″ thickness ; 24″ X 48″, 48″ X 120″, 60″ X 120″
Profiles, tubes and special sizes are available on request

This information is only to assist and advise you on current technical knowledge and is given without obligation or liability. All trade and patent rights should be observed. All rights reserved.

Plastic Products is your complete source for any plastics material.
E-mail, call or fax your requirements today.

Go to all Specification Links

CALL TODAY TO REQUEST A QUOTE: 888-752-0004